Technical Data Sheet Opto Interrupter ITR9803 ¨€ Features .Fast response time .High analytic .Peak wavelength ¦Ëp=940nm .High sensitivity .Pb free .This product itself will remain within RoHS compliant version. ¨€Descriptions TheITR9803 consist of an infrared emitting diode and an NPN silicon phototransistor, encased side-by-side on converging optical axis in a black thermoplastic housing . The phototransistor receives radiation from the IR LED only .This is the normal situation. But when an object is in between , phototransistor could not receives the radiation. For additional component information , please refer to IR and PT. ¨€ Applications .Mouse Copier .Switch Scanner .Floppy disk driver .Non-contact Switching .For Direct Board ¨€ Device Selection Guide Device No. Chip Material LENS COLOR IR GaAlAs Pink PT Silicon Water clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 1 of 7 Device No£ºDRX-0000016 Prepared date£º2009/6/20 Prepared by£ºhuangzw ITR9803 ¨€ Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ¡À0.25mm 3.Lead spacing is measured where the lead emerge from the package 4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation . Please don¡¯t reproduce or cause anyone to reproduce them without EVERLIGHT¡¯s consent 6.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 2 of 7 Device No£ºDRX-0000016 Prepared date£º2009/6/20 Prepared by£ºhuangzw ITR9803 ¨€ Absolute Maximum Ratings (Ta=25¡æ) Parameter Symbol Ratings Unit Input Power Dissipation at(or below) 25¡æ Free Air Temperature PD 75 mW Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current (*1) Pulse width ¨Q100¦Ìs, Duty cycle=1% IFP 1 A Output Collector Power Dissipation PC 75 mW Collector Current IC 20 mA Collector-Emitter Voltage B VCEO 30 V Emitter-Collector Voltage B VECO 5 V Operating Temperature Topr -25~+85 ¡æ Storage Temperature Tstg -40~+100 ¡æ Lead Soldering Temperature (*2) (1/16 inch form body for 5 seconds) Tsol 260 ¡æ (*1) tw=100 ¦Ìsec. , T=10 msec. (*2) t=5 Sec ¨€ Electro-Optical Characteristics (Ta=25¡æ) Parameter Symbol Min. Typ. Max. Unit Conditions Input Forward Voltage VF1 --1.2 1.6 V IF=20mA Reverse Current IR ---- 10 ¦ÌA VR=5V Peak Wavelength ¦ËP --940 --nm IF=20mA View Angle 2¦È1/2 --60 ---Deg IF=20mA Output Dark Current ICEO ----- 100 nA VCE=20V,Ee=0mW/cm2 C-E Saturation Voltage VCE(sat) ---- 0.4 V IC=2mA ,Ee=1mW/cm2 Transfer Characteristics Collect Current IC(ON) 0.5 ---- mA VCE=5V IF=20mA Rise time tr --15 ---¦Ìsec VCE=5V IC=1mA RL=1K. Fall time tf --15 --¦Ìsec Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 3 of 7 Device No£ºDRX-0000016 Prepared date£º2009/6/20 Prepared by£ºhuangzw Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 4 of 7 Device No£ºDRX-0000016 Prepared date£º2009/6/20 Prepared by£ºhuangzw 0 -40 -20 0 20 40 60 80 100 70 60 50 40 30 20 10 -20 0.6 0.9 0.7 0.8 1.0 0.4 0.2 0 0.2 0.4 0.6 50 70 80 60 40 30 -10 0 10 20 0 100 101 102 10 3 10 4 10 100 1000 Ie-Radiant Intensity(mW/sr) IF-Forward Current (mA) 0 20 40 60 80 100 IF=20mA Ta=25¡ãC ITR9803 ¨€ Typical Electrical/Optical/Characteristics Curves for IR Fig.1 Forward Current vs. Fig.2 Spectral Distribution vs. Ambient Temperature wavelenth Fig.3 Relative Intensity vs. Fig.4 Relative Radiant Intensity vs. Forward Current Angular Displacement -20 0.6 0.9 0.7 0.8 1.0 0.4 0.2 0 0.2 0.4 0.6 50 70 80 60 40 30 -10 0 10 20 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 5 of 7 Device No£ºDRX-0000016 Prepared date£º2009/6/20 Prepared by£ºhuangzw 0 -25 20 40 0 25 50 75 85 100 60 80 100 20 0 0 10 20 30 40 50 60 70 100 60 40 80 140 120 160 2 0.01 0.5 1 1.5 2 3 0.1 1 10 100 C 100 0 0.2 0.4 300 500 700 Ta=25 1.0 0.6 0.8 C 900 1100 1300 10 10 0 10 10 10 25 50 75 100 10 4 0 0 2 1 6 8 2 3 14 12 4 ITR9803 ¨€ Typical Electrical/Optical/Characteristics Curves for PT Fig.1Collector Power Dissipation vs. Fig.2 Spectral Sensitivity vs. Ambient Temperature Wavelenth Fig.3 Relative Collector Current vs. Fig.4 Collector Current vs. Ambient Temperature Irradiance Fig.5 Collector Dark Current vs. Fig.6 Collector Current vs. Ambient Temperature Collector-Emitter Voltage ITR9803 ¨€ Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level£º90% LTPD£º10% Test Sample Failure NO. Item Test Condition Hours/ Size Judgement Ac/Re Cycle Criteria 1 Solder Heat TEMP : 260¡æ ¡À 5 ¡æ 5 sec 22 PCs 0/1 H : +100 15 mins ¡æ 2 Temperature Cycle 5 min 300 cycle 22 PCs Attenuation of Light Current value>20% 0/1 L : -40 15 min ¡æ H : +100 5 min ¡æ 3 Thermal Shock 10 sec 300 cycle 22 PCs 0/1 L : -10 5 min ¡æ 4 High Temperature Storage TEMP. : +100¡æ 1000 hrs 22 PCs 0/1 5 Low Temperature Storage TEMP. : -40¡æ 1000 hrs 22 PCs 0/1 6 DC Operating Life VCE=5V IF=20mA 1000 hrs 22 PCs 0/1 7 High Temperature / High Humidity 85¡æ / 85% R.H. 1000 hrs 22 PCs 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 6 of 7 Device No£ºDRX-0000016 Prepared date£º2009/6/20 Prepared by£ºhuangzw ITR9803 Packing Quantity Specification 1. 120PCS/1Plate,5Plates/1Box, 10Boxes/1Carton Label Form Specification CPN: Customer¡¯s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number X: Month Reference: Identify Label Number PbRoHSEVERLIGHTXITR9803 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don¡¯t reproduce or cause anyone to reproduce them without EVERLIGHT¡¯s consent. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 7 of 7 Device No£ºDRX-0000016 Prepared date£º2009/6/20 Prepared by£ºhuangzw